PAAE135197 WARTSILA Marine Leak Detection Unit

• Brand
  WARTSILA 
• Model
  PAAE135197
• Product Name
  Marine Leak Detection Unit
• Dimensions
  125 mm height, 75 mm width, 130 mm depth
• Weight
  1.15 kg
• Place of Origin
  Finland
• HS Code
  8537109000
• Operating Temperature
  ‑10 ℃ to +55 ℃
• Storage Temperature
  ‑25 ℃ to +70 ℃
• Power Supply
  18 VA
• Warranty
  1year
• Status
  new and original

Wärtsilä PAAE135197 (LDU-20 HMI Display Unit) Technical Specification

Supported Systems, Software & Input/Output Expansion Information

1. Supported Control Systems

The LDU-20 HMI display unit (PAAE135197) is fully compatible with Wärtsilä original engine automation platforms, covering marine main engines and auxiliary generator set monitoring and control applications. It supports the following core control systems and modules:

Wärtsilä UNIC Engine Control System for dualfuel and gasfired engines

Wärtsilä ECMS (Engine Control and Monitoring System)

Integrated with Wärtsilä automation core modules, including MCM, ESM and CCM

2. Communication Interfaces

The unit is equipped with multiple standard and dedicated communication ports to realize system networking, data transmission and equipment maintenance:

Wärtsilä proprietary fieldbus

CAN bus

Ethernet

RS-232 serial interface

RS-485 serial interface

USB port (for onsite local maintenance and firmware upgrading)

3. Supported Software

Only official Wärtsilä dedicated software is applicable for device configuration, troubleshooting and upgrade. Thirdparty universal HMI runtime software is not supported.

Wärtsilä FlexView: Used for equipment parameter calibration, fault diagnosis and firmware downloading

Wärtsilä UNIC Service Tool: Applied for system commissioning, alarm log inquiry and device configuration

Builtin local operator interface software: Preinstalled in LDU-20 for realtime onsite operation and data monitoring

Firmware upgrade: Supported via USB port or dedicated service serial port, requiring official Wärtsilä service tools and authorization

4. Input/Output Capability and Expansion Instructions

The LDU-20 (PAAE135197) is a dedicated display and operation HMI device with no native physical analog or digital input/output channels. It cannot be directly connected to onsite sensors or actuators.

For I/O signal expansion, the system shall adopt the following expansion scheme:

1. Install external Wärtsilä IOM (Input/Output Module) and connect it to the system fieldbus;

2. The IOM module collects all DI/AI/DO/AO field signals and transmits data to the main control module through the fieldbus;

3. The LDU-20 displays realtime process data and alarm information, and executes operator control commands by interacting with the main control system.

All I/O parameter configuration and logic programming must be completed in the Wärtsilä UNIC / ECMS control system, rather than locally on the LDU-20 display unit.

Key Features of Wärtsilä PAAE135197 (LDU-20 HMI Display Unit)

1. Full System Compatibility

This HMI display unit is fully optimized for Wärtsilä original marine engine automation solutions, natively matching the UNIC Engine Control System and Engine Control & Monitoring System (ECMS). It delivers seamless compatibility with core control modules including MCM, ESM and CCM, and is widely applicable to monitoring and control operations for marine main engines and auxiliary generator sets.

2. Versatile Communication Interfaces

Equipped with a comprehensive suite of industrial-grade communication ports, covering Wärtsilä exclusive fieldbus, CAN bus, Ethernet, RS-232, RS-485 and USB interfaces. The diversified port configuration supports system network interconnection, real-time data transmission, on-site equipment maintenance and offline firmware upgrading, ensuring flexible and efficient device linkage and debugging.

3. Exclusive Official Software Matching

The device only supports authentic Wärtsilä official software to guarantee system stability and operational consistency. It is compatible with FlexView software for equipment parameter calibration, fault diagnosis and firmware downloading, as well as UNIC Service Tool for system commissioning, alarm record query and device parameter configuration. Built with dedicated local HMI software, the unit prohibits the installation and operation of any third-party HMI runtime programs.

4. Specialized I/O Expansion Design

Functioning as a dedicated display and operation terminal, the unit has no integrated physical DI/AI/DO/AO signal channels and cannot be directly connected to on-site field sensors and actuators. All extended I/O signals are acquired and processed by external Wärtsilä IOM modules, then transmitted to the terminal via fieldbus. All I/O parameter configuration operations are uniformly completed on the UNIC/ECMS platform rather than the local HMI terminal.

5. Rugged Marine & Industrial Grade Reliability

Featuring a high-visibility industrial LCD screen, the display unit is engineered with excellent vibration resistance and wide temperature adaptability, fully capable of withstanding harsh marine and industrial operating conditions. It serves as the core human-machine interaction terminal for engine automation systems, enabling real-time operational data monitoring, on-site alarm prompt and manual operator command execution.

3500/22-01-01-01
3500/22 288055-01
1900/65A
24765-02-01
3500/91-01-01-01
3500/44-02-01
TK-3E
177313-02-01
1900/65A-01-01-04-CN-00
2300/20-CN